FRENES

Peugeot 308 II PCD

2013–2021
VERIFIED
⌀65.1
PCD5x108
Centre bore65.1 mm
Offset (ET)ET42 to ET48
Fixing typeM12x1.25
Tightening torque95 Nm
Original tyres195/65R15, 205/55R16, 225/45R17, 225/40R18
Hub centric rings 65.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 308 II

A Peugeot 308 II (2013–2021) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET42 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/55R16, 225/45R17, 225/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 65.1 mm 6.5Jx15 ET42 195/65R15
Version 2 5x108 65.1 mm 7Jx16 ET44 205/55R16
Version 3 5x108 65.1 mm 7.5Jx17 ET44 225/45R17
Version 4 5x108 65.1 mm 8Jx18 ET48 225/40R18
Version 5 5x108 65.1 mm 8Jx19 ET42 235/35R19

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 308 II without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot 408 from 2022 Peugeot Rifter from 2018 Peugeot 5008 II 2017–2024 Peugeot 3008 II 2016–2023 Peugeot Traveller from 2016 Peugeot 308 SW 2014–2022 Peugeot RCZ-R 2014–2016 Peugeot 508 from 2011 Peugeot RCZ 2010–2016 Peugeot 3008 I 2009–2016 Peugeot 5008 I 2009–2017 Peugeot 308 I 2007–2013 Peugeot Expert 2 2006–2016 Peugeot 407 Coupe 2005–2009 Peugeot 407 2004–2010 Peugeot 607 2000–2010

Will wheels from another vehicle fit your 308 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Peugeot 308 II?

A Peugeot 308 II (2013–2021) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Peugeot 308 II need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 308 II is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 308 II?

The recorded original offset is ET42 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Peugeot 308 II?

The specified tightening torque is 95 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Peugeot 308 II?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: Peugeot 408, Peugeot Rifter, Peugeot 5008 II, Peugeot 3008 II. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.