FRENES

Wheels from Fiat 500e II on Abarth 595: compatible?

Yes, the hub is identical

Same 4x98 PCD and same 58.1 mm centre bore: wheels from Fiat 500e II bolt on and centre on Abarth 595 without rings. You still need to check the offset and tyres, detailed below.

Fiat 500e IIfrom 2020Abarth 5952016–2022
PCD4x984x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6Jx15 ET40
6Jx16 ET41
6.5Jx17 ET41		 ≈6Jx16 ET38

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Fiat 500e II is compared with the one from Abarth 595 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET41 · 195/55R16 — Fits like the original

    Compared with the original ≈6Jx16 ET38 on Abarth 595: shock absorber side +3 mm, wheel arch side −3 mm, tyre diameter +6.7 % : fit it with the original tyre size of Abarth 595 (195/45R16), not that of Fiat 500e II. Comparison for guidance only (estimated width). Check in detail

  • 6Jx15 ET40 · 185/65R15

    Abarth 595 has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx17 ET41 · 205/45R17

    Abarth 595 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Abarth 595 (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Abarth 595 on Fiat 500e II?