Abarth 595 PCD

2016–2022

VERIFIED

Centre bore58.1 mm

Offset (ET)ET38

Fixing typeM12x1.25

Tightening torque100 Nm

Original tyres195/45R16

Hub centric rings 58.1 mm → Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Abarth 595

A Abarth 595 (2016–2022) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x98 required. See all vehicles with 4x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Abarth 595 without rings. Offset, width, diameter and caliper clearance still need checking.

Abarth 500e from 2023 RAM RAM 700 Pickup from 2014 Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010 Alfa Romeo Mito 2008–2019 Alfa Romeo Mito 1.4 Sport 2008–2019 Alfa Romeo Mito 1.6 JTDm Sport 2008–2019 Citroen Nemo from 2008 Peugeot Bipper from 2008 Fiat 500 (312) from 2007 Fiat Linea 2007–2016 Lada Priora 2007–2018 Lada Kalina 2004–2018 Lancia Musa 2004–2012 Fiat Idea 2003–2016

Will wheels from another vehicle fit your 595?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Abarth 595?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Fiat Panda III from 2012 Wheels from Alfa Romeo Mito 2008–2019 Wheels from Fiat 500 (312) from 2007 Wheels from Fiat Doblo 2001–2005

Same PCD, different centre bore

These vehicles also use 4x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Lada 112 ⌀58.5 Lada 110 ⌀58.5 Alfa Romeo 75 4 trou ⌀58.6 Fiat 500 (1957) ⌀150

Frequently asked questions

What is the PCD of a Abarth 595?

A Abarth 595 (2016–2022) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Abarth 595 need a hub centric ring?

The centre bore (hub diameter) of a Abarth 595 is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Abarth 595?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Abarth 595?

The specified tightening torque is 100 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Abarth 595?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Abarth 500e, RAM RAM 700 Pickup, Fiat 500e, Fiat Panda III. Offset, width and rim diameter still need checking for each vehicle.

Other Abarth models

500e 4x98 All Abarth →

Does a value look wrong, or is a version missing? Let us know, we check every report.