FRENES

Wheels from Fiat 500e on Alfa Romeo 155: compatible?

Yes, the hub is identical

Same 4x98 PCD and same 58.1 mm centre bore: wheels from Fiat 500e bolt on and centre on Alfa Romeo 155 without rings. You still need to check the offset and tyres, detailed below.

Fiat 500e2013–2019Alfa Romeo 1551992–1997
PCD4x984x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M12x1.25
Original wheels ≈6Jx15 ET35
≈6Jx15 ET40		 ≈6Jx15 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Fiat 500e is compared with the one from Alfa Romeo 155 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET35 · 185/55R15 — Fits like the original

    Compared with the original ≈6Jx15 ET40 on Alfa Romeo 155: shock absorber side −5 mm, wheel arch side +5 mm, tyre diameter −1.8 %. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx15 ET40 · 185/65R15 — Fits like the original

    Compared with the original ≈6Jx15 ET40 on Alfa Romeo 155: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +4.4 % : fit it with the original tyre size of Alfa Romeo 155 (195/55R15), not that of Fiat 500e. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Alfa Romeo 155 (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Alfa Romeo 155 on Fiat 500e?