FRENES

Wheels from Ford Capri on McLaren 750S: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Ford Capri bolt on and centre on McLaren 750S without rings. You still need to check the offset and tyres, detailed below.

Ford Caprifrom 2024McLaren 750Sfrom 2023
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.50M14x1.50
Original wheels 8Jx19 ET45 9Jx19 ET41.65

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Ford Capri is compared with the one from McLaren 750S of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8Jx19 ET45 · 235/55R19 — Fits like the original

    Compared with the original 9Jx19 ET41.65 on McLaren 750S: shock absorber side −9.3 mm, wheel arch side −16.1 mm, tyre diameter +13.3 % : fit it with the original tyre size of McLaren 750S (245/35R19), not that of Ford Capri. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of McLaren 750S (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from McLaren 750S on Ford Capri?