Yes, the hub is identical
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Ford Probe bolt on and centre on Hyundai ix20 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Ford Probe is compared with the one from Hyundai ix20 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈6.5Jx15 ET40 · 205/55R15 — Check on the car
Compared with the original 6Jx15 ET48 on Hyundai ix20: shock absorber side −1.6 mm, wheel arch side +14.4 mm, tyre diameter −4.4 % : fit it with the original tyre size of Hyundai ix20 (195/65R15), not that of Ford Probe.
Comparison for guidance only (estimated width). Check in detail
- ?
≈6Jx14 ET42 · 185/70R14
Hyundai ix20 has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Hyundai ix20 (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Hyundai ix20 on Ford Probe?