Yes, the hub is identical
Same 4x108 PCD and same 63.4 mm centre bore: wheels from Ford Scorpio bolt on and centre on Ford EcoSport without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Ford Scorpio is compared with the one from Ford EcoSport of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈6Jx15 ET38 · 195/65R15 — Fits like the original
Compared with the original ≈6Jx15 ET37.5 on Ford EcoSport: shock absorber side +0.5 mm, wheel arch side −0.5 mm, tyre diameter +0 %.
Comparison for guidance only (estimated width). Check in detail
- !
≈6Jx15 ET47 · 195/65R15 — Check on the car
Compared with the original ≈6Jx15 ET37.5 on Ford EcoSport: shock absorber side +9.5 mm, wheel arch side −9.5 mm, tyre diameter +0 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Ford EcoSport (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Ford EcoSport on Ford Scorpio?