FRENES

Ford Scorpio PCD

1985–1994
VERIFIED
⌀63.4
PCD5x112 or 4x108
Centre bore63.4 mm
Offset (ET)ET38 to ET47
Fixing typeEcrous - 12x1.50
Tightening torque85 Nm
Original tyres195/65R15
⚠ This model comes with 5x112 or 4x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 63.4 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Scorpio

A Ford Scorpio (1985–1994) uses a 5x112 or 4x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 or 4x108 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET38 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 85 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 63.4 mm — ET38 195/65R15
Version 2 4x108 63.4 mm — ET47 195/65R15

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Scorpio without rings. Offset, width, diameter and caliper clearance still need checking.

Ford Granada 1978–1985

Will wheels from another vehicle fit your Scorpio?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Scorpio?

A Ford Scorpio (1985–1994) can have a 5x112 or 4x108 PCD depending on the version: check on an original wheel.

Does a Ford Scorpio need a hub centric ring?

The centre bore (hub diameter) of a Ford Scorpio is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Scorpio?

The recorded original offset is ET38 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Scorpio?

The specified tightening torque is 85 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Scorpio?

With the same PCD (5x112) and the same centre bore (63.4 mm), these include: Ford Granada. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.