FRENES

Wheels from Genesis GV70 on Mazda CX-60: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Genesis GV70 bolt on and centre on Mazda CX-60 without rings. You still need to check the offset and tyres, detailed below.

Genesis GV70from 2020Mazda CX-60from 2022
PCD5x114.35x114.3
Centre bore67.1 mm67.1 mm
ThreadM14x1.50Ecrous - 12x1.50
Original wheels ≈7.5Jx18 ET39 7.5Jx18 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Genesis GV70 is compared with the one from Mazda CX-60 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx18 ET39 · 235/60R18 — Check on the car

    Compared with the original 7.5Jx18 ET45 on Mazda CX-60: shock absorber side −6 mm, wheel arch side +6 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mazda CX-60 (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mazda CX-60 on Genesis GV70?