FRENES

Mazda CX-60 PCD

from 2022
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET45
Fixing typeEcrous - 12x1.50
Tightening torque130 Nm
Original tyres235/60R18
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda CX-60

A Mazda CX-60 (from 2022) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda CX-60 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Mazda MX-30 from 2020 Mazda CX-30 from 2019 Mazda CX-3 2015–2024 Mazda Mazda3 2013–2019 Mazda CX-5 2012–2017 Mazda Mazda3 MPS 2009–2013 Mazda CX-7 2007–2012 Mazda CX-9 from 2007 Mazda 3 MPS 2006–2009 Mazda 6 MPS 2006–2008 Mazda 5 2005–2010 Mazda 3 2003–2009 Mazda RX-8 2003–2012 Mazda 6 2002–2008

Will wheels from another vehicle fit your CX-60?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mazda CX-60?

A Mazda CX-60 (from 2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mazda CX-60 need a hub centric ring?

The centre bore (hub diameter) of a Mazda CX-60 is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda CX-60?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda CX-60?

The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda CX-60?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Mazda CX-80, Mazda Mazda6e, Mazda MX-30, Mazda CX-30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.