Yes, the hub is identical
Same 5x120 PCD and same 64.1 mm centre bore: wheels from Honda Civic Type R FK8 bolt on and centre on BYD Tang without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Honda Civic Type R FK8 is compared with the one from BYD Tang of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
8.5Jx20 ET60 · 245/30R20 — Check on the car
Compared with the original ≈8Jx20 ET41 on BYD Tang: shock absorber side +25.4 mm, wheel arch side −12.7 mm, tyre diameter −14.2 % : fit it with the original tyre size of BYD Tang (255/50R20), not that of Honda Civic Type R FK8.
Comparison for guidance only (estimated width). Check in detail
- ?
8Jx18 ET55 · 235/40R18
BYD Tang has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BYD Tang (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from BYD Tang on Honda Civic Type R FK8?