FRENES

Wheels from Honda Elysion on Acura 3.5 RL: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 64.1 mm centre bore: wheels from Honda Elysion bolt on and centre on Acura 3.5 RL without rings. You still need to check the offset and tyres, detailed below.

Honda Elysion2004–2015Acura 3.5 RL1996–2004
PCD5x114.35x114.3
Centre bore64.1 mm64.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈7Jx16 ET55
≈7Jx18 ET55		 ≈7Jx16 ET55

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Honda Elysion is compared with the one from Acura 3.5 RL of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7Jx16 ET55 · 215/65R16 — Fits like the original

    Compared with the original ≈7Jx16 ET55 on Acura 3.5 RL: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +3.2 % : fit it with the original tyre size of Acura 3.5 RL (215/60R16), not that of Honda Elysion. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx18 ET55 · 225/50R18

    Acura 3.5 RL has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Acura 3.5 RL (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Acura 3.5 RL on Honda Elysion?