FRENES

Wheels from Honda Jazz on Rover 200-Serie: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 56.1 mm centre bore: wheels from Honda Jazz bolt on and centre on Rover 200-Serie without rings. You still need to check the offset and tyres, detailed below.

Honda Jazz2002–2008Rover 200-Serie1989–1999
PCD4x1004x100
Centre bore56.1 mm56.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈5.5Jx14 ET45
≈6Jx14 ET45
≈5.5Jx15 ET45		 R
≈5.5Jx14 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Honda Jazz is compared with the one from Rover 200-Serie of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈5.5Jx14 ET45 · 175/70R14 — Fits like the original

    Compared with the original ≈5.5Jx14 ET45 on Rover 200-Serie: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +3 % : fit it with the original tyre size of Rover 200-Serie (175/65R14), not that of Honda Jazz. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx14 ET45 · 185/60R14 — Check on the car

    Compared with the original ≈5.5Jx14 ET45 on Rover 200-Serie: shock absorber side +6.3 mm, wheel arch side +6.3 mm, tyre diameter −0.9 %. Comparison for guidance only (estimated width). Check in detail

  • ≈5.5Jx15 ET45 · 175/65R15

    Rover 200-Serie has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Rover 200-Serie (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Rover 200-Serie on Honda Jazz?