FRENES

Rover 200-Serie PCD

1989–1999
VERIFIED
⌀56.1
PCD4x100
Centre bore56.1 mm
Offset (ET)ET45
Fixing typeEcrous - 12x1.50
Original tyres175/65R14
Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Rover 200-Serie

A Rover 200-Serie (1989–1999) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.1 mm — ET45 175/65R14
Version 2 4x100 56.1 mm — ET45 —

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Rover 200-Serie without rings. Offset, width, diameter and caliper clearance still need checking.

Rover CityRover 2004–2006 Rover Streetwise 2004–2006 Rover 25 2000–2006 Rover 45 2000–2006 Rover 400-Serie 1989–2000 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007

Will wheels from another vehicle fit your 200-Serie?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Rover 200-Serie?

A Rover 200-Serie (1989–1999) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Rover 200-Serie need a hub centric ring?

The centre bore (hub diameter) of a Rover 200-Serie is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Rover 200-Serie?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Rover 200-Serie?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Rover CityRover, Rover Streetwise, Rover 25, Rover 45. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.