FRENES

Wheels from Hyundai Atos on Kia Picanto III: compatible?

Yes, with hub centric rings

Same 4x100 PCD, but the centre bore of the wheels from Hyundai Atos (67.1 mm) is larger than the hub of Kia Picanto III (54.1 mm): you need 4 hub centric rings 67.1 → 54.1.

Rings 67.1 → 54.1

Hyundai Atos1997–2000Kia Picanto IIIfrom 2017
PCD4x114.3 / 4x1004x100
Centre bore67.1 mm54.1 mm
ThreadEcrous - 12x1.50M12x1.5
Original wheels ≈5Jx13 ET46 4.5Jx13 ET41
5.5Jx14 ET45
6Jx15 ET51
6.5Jx16 ET51

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai Atos is compared with the one from Kia Picanto III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈5Jx13 ET46 · 155/70R13 — Check on the car

    Compared with the original 4.5Jx13 ET41 on Kia Picanto III: shock absorber side +11.4 mm, wheel arch side +1.4 mm, tyre diameter −5.4 % : fit it with the original tyre size of Kia Picanto III (155/80R13), not that of Hyundai Atos. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Kia Picanto III (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Kia Picanto III on Hyundai Atos?