FRENES

Hyundai Atos PCD

1997–2000
VERIFIED
⌀67.1
PCD4x114.3 or 4x100
Centre bore67.1 or 54.1 mm
Offset (ET)ET46
Fixing typeEcrous - 12x1.50
Tightening torque100 Nm
Original tyres155/70R13
⚠ This model comes with 4x114.3 or 4x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 67.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Atos

A Hyundai Atos (1997–2000) uses a 4x114.3 or 4x100 PCD and a centre bore of 67.1 or 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 or 4x100 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 67.1 mm — ET46 155/70R13
Version 2 4x100 54.1 mm — ET46 155/70R13

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Atos without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Matrix 2001–2010 Hyundai Coupe 1996–2002 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Hyundai Sonata 1993–1998 Hyundai Elantra 1991–2000 Hyundai Lantra 1991–2000 Hyundai Pony 1990–1994 Smart Forfour 2004–2007 Kia Cerato 2003–2008 Mitsubishi Lancer 1.3i, 1.6i 2003–2008 Kia Carens 2000–2006 Kia Magentis 2000–2005 Kia Optima 2000–2005 Mitsubishi Carisma 1.6, 1.8GDi,1.9TD 2000–2004 Kia Joice 1999–2002

Will wheels from another vehicle fit your Atos?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Atos?

A Hyundai Atos (1997–2000) can have a 4x114.3 or 4x100 PCD depending on the version: check on an original wheel.

Does a Hyundai Atos need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Atos is 67.1 or 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Atos?

The recorded original offset is ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Hyundai Atos?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Hyundai Atos?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Hyundai Matrix, Hyundai Coupe, Hyundai Accent, Hyundai Excel. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.