FRENES

Wheels from Hyundai i10 III on Daihatsu Copen: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 54.1 mm centre bore: wheels from Hyundai i10 III bolt on and centre on Daihatsu Copen without rings. You still need to check the offset and tyres, detailed below.

Hyundai i10 IIIfrom 2019Daihatsu Copen2002–2012
PCD4x1004x100
Centre bore54.1 mm54.1 mm
ThreadM12x1.5Ecrous - 12x1.50
Original wheels 5.5Jx14 ET42
6Jx15 ET48
6.5Jx16 ET48		 ≈5Jx14 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai i10 III is compared with the one from Daihatsu Copen of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 5.5Jx14 ET42 · 175/65R14 — Check on the car

    Compared with the original ≈5Jx14 ET45 on Daihatsu Copen: shock absorber side +3.3 mm, wheel arch side +9.3 mm, tyre diameter +10.8 % : fit it with the original tyre size of Daihatsu Copen (155/55R14), not that of Hyundai i10 III. Comparison for guidance only (estimated width). Check in detail

  • 6Jx15 ET48 · 185/55R15

    Daihatsu Copen has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx16 ET48 · 195/45R16

    Daihatsu Copen has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Daihatsu Copen (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Daihatsu Copen on Hyundai i10 III?