FRENES

Hyundai i10 III PCD

from 2019
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET42 to ET48
Fixing typeM12x1.5
Original tyres175/65R14, 185/55R15, 195/45R16
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i10 III

A Hyundai i10 III (from 2019) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET42 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/65R14, 185/55R15, 195/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 5.5Jx14 ET42 175/65R14
Version 2 4x100 54.1 mm 6Jx15 ET48 185/55R15
Version 3 4x100 54.1 mm 6.5Jx16 ET48 195/45R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i10 III without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Hyundai i20 III from 2020 Hyundai i10 I 2008–2013 Hyundai i20 I 2008–2015 Hyundai Getz Cross 2007–2008 Hyundai Getz 2002–2011 Hyundai Atos 1997–2000 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Toyota Aygo X 2021–2025 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Mazda Mazda2 from 2015 Suzuki Alivio 2015–2021

Will wheels from another vehicle fit your i10 III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i10 III?

A Hyundai i10 III (from 2019) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Hyundai i10 III need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i10 III is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i10 III?

The recorded original offset is ET42 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai i10 III?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Hyundai i20 III, Hyundai i10 I. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.