FRENES

Wheels from Hyundai i30 III on Hyundai Kona: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Hyundai i30 III bolt on and centre on Hyundai Kona without rings. You still need to check the offset and tyres, detailed below.

Hyundai i30 IIIfrom 2017Hyundai Kona2017–2022
PCD5x114.35x114.3
Centre bore67.1 mm67.1 mm
ThreadM12x1.5Ecrous - 12x1.50
Original wheels 6Jx15 ET46
6.5Jx16 ET48
6.5Jx16 ET50
7Jx17 ET51
7.5Jx18 ET53		 ≈6.5Jx16 ET44
7.5Jx18 ET52

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Hyundai i30 III is compared with the one from Hyundai Kona of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET48 · 205/55R16 — Check on the car

    Compared with the original ≈6.5Jx16 ET44 on Hyundai Kona: shock absorber side +4 mm, wheel arch side −4 mm, tyre diameter −6.1 % : fit it with the original tyre size of Hyundai Kona (205/65R16), not that of Hyundai i30 III. Comparison for guidance only (estimated width). Check in detail

  • 6.5Jx16 ET50 · 205/55R16 — Check on the car

    Compared with the original ≈6.5Jx16 ET44 on Hyundai Kona: shock absorber side +6 mm, wheel arch side −6 mm, tyre diameter −6.1 % : fit it with the original tyre size of Hyundai Kona (205/65R16), not that of Hyundai i30 III. Comparison for guidance only (estimated width). Check in detail

  • 7.5Jx18 ET53 · 225/40R18 — Fits like the original

    Compared with the original 7.5Jx18 ET52 on Hyundai Kona: shock absorber side +1 mm, wheel arch side −1 mm, tyre diameter −4.7 % : fit it with the original tyre size of Hyundai Kona (235/45R18), not that of Hyundai i30 III. Check in detail

  • 6Jx15 ET46 · 195/65R15

    Hyundai Kona has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET51 · 225/45R17

    Hyundai Kona has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Hyundai Kona (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Hyundai Kona on Hyundai i30 III?