FRENES

Hyundai Kona PCD

2017–2022
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET44 to ET52
Fixing typeEcrous - 12x1.50
Tightening torque118 Nm
Original tyres235/45R18, 205/65R16
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Kona

A Hyundai Kona (2017–2022) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET44 to ET52. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 118 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/45R18, 205/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 7.5Jx18 ET52 235/45R18
Version 2 5x114.3 67.1 mm — ET44 205/65R16

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Kona without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai i30 III from 2017 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i40 from 2011 Hyundai Veloster 2011–2017 Hyundai ix20 from 2010 Hyundai ix35 from 2010 Hyundai ix55 from 2009 Hyundai Genesis from 2008 Hyundai i30 I 2007–2012

Will wheels from another vehicle fit your Kona?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Kona?

A Hyundai Kona (2017–2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Kona need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Kona is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Kona?

The recorded original offset is ET44 to ET52 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Hyundai Kona?

The specified tightening torque is 118 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Hyundai Kona?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai IONIQ 6, Hyundai Stargazer, Hyundai IONIQ 5, Hyundai IONIQ 5 N. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.