Yes, the hub is identical
Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Hyundai Kona bolt on and centre on Hyundai Grandeur without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Hyundai Kona is compared with the one from Hyundai Grandeur of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈6.5Jx16 ET44 · 205/65R16 — Fits like the original
Compared with the original ≈7Jx16 ET39 on Hyundai Grandeur: shock absorber side −1.3 mm, wheel arch side −11.4 mm, tyre diameter −1.9 %.
Comparison for guidance only (estimated width). Check in detail
- ?
7.5Jx18 ET52 · 235/45R18
Hyundai Grandeur has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Hyundai Grandeur (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Hyundai Grandeur on Hyundai Kona?