Yes, the hub is identical
Same 5x108 PCD and same 63.4 mm centre bore: wheels from Jaguar S-Type R bolt on and centre on Ford Tourneo Courier without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Jaguar S-Type R is compared with the one from Ford Tourneo Courier of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7Jx16 ET60 · 225/55R16 — Check on the car
Compared with the original ≈6.5Jx16 ET48 on Ford Tourneo Courier: shock absorber side +18.4 mm, wheel arch side −5.7 mm, tyre diameter −2.8 % : fit it with the original tyre size of Ford Tourneo Courier (205/65R16), not that of Jaguar S-Type R.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Ford Tourneo Courier (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Ford Tourneo Courier on Jaguar S-Type R?