Wheels from Jeep Cherokee on Chrysler 300M: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 71.6 mm centre bore: wheels from Jeep Cherokee bolt on and centre on Chrysler 300M without rings. You still need to check the offset and tyres, detailed below.

Jeep Cherokee2014–2024Chrysler 300M1998–2004
PCD5x110 / 5x127 / 5x114.35x114.3
Centre bore71.6 mm71.6 mm
ThreadM12x1.25Ecrous - 12x1.50
Original wheels ≈7.5Jx16 ET42
7Jx17 ET41
≈7Jx17 ET45
≈7Jx16 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Jeep Cherokee is compared with the one from Chrysler 300M of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx16 ET42 · 235/70R16 — Check on the car

    Compared with the original ≈7Jx16 ET40 on Chrysler 300M: shock absorber side +8.4 mm, wheel arch side +4.4 mm, tyre diameter +8.7 % : fit it with the original tyre size of Chrysler 300M (225/60R16), not that of Jeep Cherokee. Comparison for guidance only (estimated width). Check in detail

  • 7Jx17 ET41 · 225/60R17

    Chrysler 300M has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈7Jx17 ET45 · 225/65R17

    Chrysler 300M has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Chrysler 300M (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Chrysler 300M on Jeep Cherokee?