FRENES

Wheels from Jeep Cherokee on Pontiac G6: compatible?

Yes, with hub centric rings

Same 5x110 PCD, but the centre bore of the wheels from Jeep Cherokee (71.6 mm) is larger than the hub of Pontiac G6 (65.1 mm): you need 4 hub centric rings 71.6 → 65.1.

Rings 71.6 → 65.1

Jeep Cherokee2014–2024Pontiac G62004–2009
PCD5x110 / 5x127 / 5x114.35x110
Centre bore71.6 mm65.1 mm
ThreadM12x1.25Ecrous - 12x1.50
Original wheels ≈7.5Jx16 ET42
7Jx17 ET41
≈7Jx17 ET45		 ≈7Jx16 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Jeep Cherokee is compared with the one from Pontiac G6 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx16 ET42 · 235/70R16 — Check on the car

    Compared with the original ≈7Jx16 ET45 on Pontiac G6: shock absorber side +3.4 mm, wheel arch side +9.4 mm, tyre diameter +10.7 % : fit it with the original tyre size of Pontiac G6 (215/60R16), not that of Jeep Cherokee. Comparison for guidance only (estimated width). Check in detail

  • 7Jx17 ET41 · 225/60R17

    Pontiac G6 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈7Jx17 ET45 · 225/65R17

    Pontiac G6 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Pontiac G6 (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Pontiac G6 on Jeep Cherokee?