FRENES

Wheels from Lancia Ypsilon on RAM RAM 700 Pickup: compatible?

Yes, the hub is identical

Same 4x98 PCD and same 58.1 mm centre bore: wheels from Lancia Ypsilon bolt on and centre on RAM RAM 700 Pickup without rings. You still need to check the offset and tyres, detailed below.

Lancia Ypsilon2003–2011RAM RAM 700 Pickupfrom 2014
PCD4x984x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25Ecrous - 12x1.25
Original wheels ≈6Jx14 ET40
≈6Jx15 ET40		 ≈5.5Jx14 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Lancia Ypsilon is compared with the one from RAM RAM 700 Pickup of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx14 ET40 · 185/65R14 — Check on the car

    Compared with the original ≈5.5Jx14 ET40 on RAM RAM 700 Pickup: shock absorber side +6.3 mm, wheel arch side +6.3 mm, tyre diameter −0.7 %. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx15 ET40 · 185/55R15

    RAM RAM 700 Pickup has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of RAM RAM 700 Pickup (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from RAM RAM 700 Pickup on Lancia Ypsilon?