FRENES

RAM RAM 700 Pickup PCD

from 2014
VERIFIED
⌀58.1
PCD4x98
Centre bore58.1 mm
Offset (ET)ET40
Fixing typeEcrous - 12x1.25
Tightening torque120 Nm
Original tyres175/70R14
Hub centric rings 58.1 mm → Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a RAM RAM 700 Pickup

A RAM RAM 700 Pickup (from 2014) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x98 required. See all vehicles with 4x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a RAM RAM 700 Pickup without rings. Offset, width, diameter and caliper clearance still need checking.

Abarth 500e from 2023 Abarth 595 2016–2022 Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010 Alfa Romeo Mito 2008–2019 Alfa Romeo Mito 1.4 Sport 2008–2019 Alfa Romeo Mito 1.6 JTDm Sport 2008–2019 Citroen Nemo from 2008 Peugeot Bipper from 2008 Fiat 500 (312) from 2007 Fiat Linea 2007–2016 Lada Priora 2007–2018 Lada Kalina 2004–2018 Lancia Musa 2004–2012 Fiat Idea 2003–2016

Will wheels from another vehicle fit your RAM 700 Pickup?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a RAM RAM 700 Pickup?

A RAM RAM 700 Pickup (from 2014) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a RAM RAM 700 Pickup need a hub centric ring?

The centre bore (hub diameter) of a RAM RAM 700 Pickup is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a RAM RAM 700 Pickup?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a RAM RAM 700 Pickup?

The specified tightening torque is 120 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a RAM RAM 700 Pickup?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Abarth 500e, Abarth 595, Fiat 500e, Fiat Panda III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.