FRENES

Wheels from Land Rover Evoque II on Polestar Polestar 3 axe arrière: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 63.4 mm centre bore: wheels from Land Rover Evoque II bolt on and centre on Polestar Polestar 3 axe arrière without rings. You still need to check the offset and tyres, detailed below.

Land Rover Evoque IIfrom 2018Polestar Polestar 3 axe arrièrefrom 2023
PCD5x1085x108
Centre bore63.4 mm63.4 mm
ThreadM14x1.5M14x1.50
Original wheels 7Jx17 ET45
8Jx18 ET45
8Jx20 ET45
8Jx20 ET40		 ≈9Jx20 ET30

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Land Rover Evoque II is compared with the one from Polestar Polestar 3 axe arrière of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 8Jx20 ET45 · 235/50R20 — Fits like the original

    Compared with the original ≈9Jx20 ET30 on Polestar Polestar 3 axe arrière: shock absorber side +2.3 mm, wheel arch side −27.7 mm, tyre diameter −2.8 % : fit it with the original tyre size of Polestar Polestar 3 axe arrière (285/45R20), not that of Land Rover Evoque II. Comparison for guidance only (estimated width). Check in detail

  • 8Jx20 ET40 · 235/50R20 — Fits like the original

    Compared with the original ≈9Jx20 ET30 on Polestar Polestar 3 axe arrière: shock absorber side −2.7 mm, wheel arch side −22.7 mm, tyre diameter −2.8 % : fit it with the original tyre size of Polestar Polestar 3 axe arrière (285/45R20), not that of Land Rover Evoque II. Comparison for guidance only (estimated width). Check in detail

  • 7Jx17 ET45 · 235/65R17

    Polestar Polestar 3 axe arrière has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 8Jx18 ET45 · 235/60R18

    Polestar Polestar 3 axe arrière has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Polestar Polestar 3 axe arrière (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Polestar Polestar 3 axe arrière on Land Rover Evoque II?