A Land Rover Evoque II (from 2018) uses a 5x108 PCD and a centre bore of 63.4 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
Offset: the original is ET40 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5, tightened to 133 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/65R17, 235/60R18, 235/50R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Land Rover Evoque
Previous generation: Land Rover Evoque (2011–2018) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x108
63.4 mm
7Jx17
ET45
235/65R17
Version 2
5x108
63.4 mm
8Jx18
ET45
235/60R18
Version 3
5x108
63.4 mm
8Jx20
ET45
235/50R20
Version 4
5x108
63.4 mm
8Jx20
ET40
235/50R20
Vehicles with the same PCD and centre bore
Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Land Rover Evoque II without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.4 mm, and will not fit if it is smaller.
A Land Rover Evoque II (from 2018) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.
Does a Land Rover Evoque II need a hub centric ring?
The centre bore (hub diameter) of a Land Rover Evoque II is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Land Rover Evoque II?
The recorded original offset is ET40 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Land Rover Evoque II?
The specified tightening torque is 133 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Land Rover Evoque II?
With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Land Rover Range Rover Velar, Land Rover Discovery Sport, Land Rover Evoque, Land Rover Freelander II. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more