Same 5x100 PCD and same 54.1 mm centre bore: wheels from Mazda Mazda2 Hybrid bolt on and centre on Toyota Yaris IV without rings. You still need to check the offset and tyres, detailed below.
| Mazda Mazda2 Hybridfrom 2022 | Toyota Yaris IVfrom 2020 | |
|---|---|---|
| PCD | 5x100 | 5x100 |
| Centre bore | 54.1 mm | 54.1 mm |
| Thread | Ecrous - 12x1.50 | M12x1.50 |
| Original wheels | 6Jx15 ET45 | 6Jx15 ET45 6Jx16 ET50 6.5Jx17 ET50 |
≈: width estimated from the original tyre size.
Each original wheel from Mazda Mazda2 Hybrid is compared with the one from Toyota Yaris IV of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 6Jx15 ET45 on Toyota Yaris IV: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota Yaris IV (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota Yaris IV on Mazda Mazda2 Hybrid?