FRENES

Toyota Yaris IV PCD

from 2020
VERIFIED
⌀54.1
PCD5x100
Centre bore54.1 mm
Offset (ET)ET45 to ET50
Fixing typeM12x1.50
Tightening torque103 Nm
Original tyres185/65R15, 195/55R16, 205/45R17
Version européenne. Les Yaris IV japonaises sont en 4x100 ; la GR Yaris est en 5x114.3.
Hub centric rings 54.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Yaris IV

A Toyota Yaris IV (from 2020) uses a 5x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET45 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/55R16, 205/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 54.1 mm 6Jx15 ET45 185/65R15
Version 2 5x100 54.1 mm 6Jx16 ET50 195/55R16
Version 3 5x100 54.1 mm 6.5Jx17 ET50 205/45R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Yaris IV without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Corolla US 2013–2019 Toyota Verso S from 2010 Toyota Urban Cruiser from 2009 Toyota Avensis II 2003–2008 Toyota Yaris I 1999–2005 Toyota Avensis 1998–2003 Toyota Prius 1997–2003 Toyota Carina 1992–1997 Toyota Carina 5 trou 1988–1992 Toyota Camry 1982–1986 Toyota Celica 1971–1977 Mazda Mazda2 Hybrid from 2022 Lexus CT200h from 2011 Subaru Trezia 2010–2016

Will wheels from another vehicle fit your Yaris IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota Yaris IV?

A Toyota Yaris IV (from 2020) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Toyota Yaris IV need a hub centric ring?

The centre bore (hub diameter) of a Toyota Yaris IV is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Yaris IV?

The recorded original offset is ET45 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Yaris IV?

The specified tightening torque is 103 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Yaris IV?

With the same PCD (5x100) and the same centre bore (54.1 mm), these include: Toyota Corolla US, Toyota Verso S, Toyota Urban Cruiser, Toyota Avensis II. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.