Yes, with hub centric rings
Same 5x108 PCD, but the centre bore of the wheels from Mercedes Citan (66.1 mm) is larger than the hub of Renault Kangoo 2 5 trou (60.1 mm): you need 4 hub centric rings 66.1 → 60.1.
Rings 66.1 → 60.1
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Mercedes Citan is compared with the one from Renault Kangoo 2 5 trou of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
5.5Jx14 ET44 · 185/70R14 — Fits like the original
Compared with the original 5.5Jx14 ET44 on Renault Kangoo 2 5 trou: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %.
Check in detail
- ?
≈6Jx15 ET38 · 195/65R15
Renault Kangoo 2 5 trou has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Kangoo 2 5 trou (-), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Kangoo 2 5 trou on Mercedes Citan?