FRENES

Mercedes Citan PCD

from 2012
VERIFIED
⌀60.1
PCD5x108 or 5x114.3
Centre bore60.1 or 66.1 mm
Offset (ET)ET38 to ET44
Fixing typeM12x1.50
Tightening torque110 Nm
Original tyres185/70R14, 195/65R15
⚠ This model comes with 5x108 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 60.1 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes Citan

A Mercedes Citan (from 2012) uses a 5x108 or 5x114.3 PCD and a centre bore of 60.1 or 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 or 5x114.3 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET38 to ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/70R14, 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 60.1 mm 5.5Jx14 ET44 185/70R14
Version 2 5x114.3 66.1 mm — ET38 195/65R15

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes Citan without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan NV250 2019–2022 Renault Kangoo 2 5 trou 2008–2013 Renault Clio Sport 2006–2013 Renault Megane 2.0 dCi 2005–2008 Renault Espace IV 2002–2015 Renault Avantime 2001–2003 Renault VelSatis 2001–2009 Renault Laguna 2 2000–2007 Renault Megane Scenic RX-4 2000–2003 Renault Kangoo 1998–2007 Renault Espace 3 1997–2002 Renault Laguna 1 5 trou 1994–2000 Renault Safrane V6 1992–2000 Renault Espace 2 1991–1996 Renault 21 5 trou 1986–1995

Will wheels from another vehicle fit your Citan?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes Citan?

A Mercedes Citan (from 2012) can have a 5x108 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Mercedes Citan need a hub centric ring?

The centre bore (hub diameter) of a Mercedes Citan is 60.1 or 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes Citan?

The recorded original offset is ET38 to ET44 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes Citan?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes Citan?

With the same PCD (5x108) and the same centre bore (60.1 mm), these include: Nissan NV250, Renault Kangoo 2 5 trou, Renault Clio Sport, Renault Megane 2.0 dCi. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.