FRENES

Wheels from Mercedes Sprinter W907 on Volkswagen Crafter 30,35: compatible?

Yes, the hub is identical

Same 6x130 PCD and same 84.1 mm centre bore: wheels from Mercedes Sprinter W907 bolt on and centre on Volkswagen Crafter 30,35 without rings. You still need to check the offset and tyres, detailed below.

Mercedes Sprinter W907from 2018Volkswagen Crafter 30,352006–2013
PCD6x1306x130
Centre bore84.1 mm84.1 mm
ThreadM14x1.5M14x1.50
Original wheels 6.5Jx16 ET54
6.5Jx16 ET62
6.5Jx16 ET62
6.5Jx16 ET62
6.5Jx16 ET54
6.5Jx16 ET62
6.5Jx17 ET62		 5.5Jx16 ET51

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mercedes Sprinter W907 is compared with the one from Volkswagen Crafter 30,35 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET54 · 205/75R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +15.7 mm, wheel arch side +9.7 mm, tyre diameter +0 %. Check in detail

  • 6.5Jx16 ET62 · 205/75R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +23.7 mm, wheel arch side +1.7 mm, tyre diameter +0 %. Check in detail

  • 6.5Jx16 ET62 · 225/65R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +23.7 mm, wheel arch side +1.7 mm, tyre diameter −2.1 % : fit it with the original tyre size of Volkswagen Crafter 30,35 (205/75R16), not that of Mercedes Sprinter W907. Check in detail

  • 6.5Jx16 ET62 · 225/75R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +23.7 mm, wheel arch side +1.7 mm, tyre diameter +4.2 % : fit it with the original tyre size of Volkswagen Crafter 30,35 (205/75R16), not that of Mercedes Sprinter W907. Check in detail

  • 6.5Jx16 ET54 · 235/65R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +15.7 mm, wheel arch side +9.7 mm, tyre diameter −0.3 %. Check in detail

  • 6.5Jx16 ET62 · 235/65R16 — Risk of rubbing

    Compared with the original 5.5Jx16 ET51 on Volkswagen Crafter 30,35: shock absorber side +23.7 mm, wheel arch side +1.7 mm, tyre diameter −0.3 %. Check in detail

  • 6.5Jx17 ET62 · 235/60R17

    Volkswagen Crafter 30,35 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volkswagen Crafter 30,35 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Volkswagen Crafter 30,35 on Mercedes Sprinter W907?