FRENES

Volkswagen Crafter 30,35 PCD

2006–2013
VERIFIED
⌀84.1
PCD6x130
Centre bore84.1 mm
Offset (ET)ET51
Fixing typeM14x1.50
Original tyres205/75R16
Hub centric rings 84.1 mm → Wheel spacers 6x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Crafter 30,35

A Volkswagen Crafter 30,35 (2006–2013) uses a 6x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x130 required. See all vehicles with 6x130.
  • Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
  • Offset: the original is ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 6x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Crafter 30,35 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes eSprinter from 2021 Mercedes Sprinter 1995–2000

Will wheels from another vehicle fit your Crafter 30,35?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen Crafter 30,35?

A Volkswagen Crafter 30,35 (2006–2013) has a PCD of 6x130: 6 studs or bolts spaced around a circle 130 mm in diameter.

Does a Volkswagen Crafter 30,35 need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Crafter 30,35 is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Crafter 30,35?

The recorded original offset is ET51. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Volkswagen Crafter 30,35?

With the same PCD (6x130) and the same centre bore (84.1 mm), these include: Mercedes eSprinter, Mercedes Sprinter. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.