Yes, the hub is identical
Same 5x112 PCD and same 66.6 mm centre bore: wheels from MG HS (2024) bolt on and centre on BMW 2 Serie Gran Coupe F74 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from MG HS (2024) is compared with the one from BMW 2 Serie Gran Coupe F74 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6.5Jx18 ET38 · 215/60R18 — Fits like the original
Compared with the original 8Jx18 ET54 on BMW 2 Serie Gran Coupe F74: shock absorber side −35.1 mm, wheel arch side −3.1 mm, tyre diameter +8.4 % : fit it with the original tyre size of BMW 2 Serie Gran Coupe F74 (225/45R18), not that of MG HS (2024).
Check in detail
- ?
7Jx19 ET38 · 225/55R19
BMW 2 Serie Gran Coupe F74 has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BMW 2 Serie Gran Coupe F74 (M14x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from BMW 2 Serie Gran Coupe F74 on MG HS (2024)?