FRENES

MG HS (2024) PCD

from 2024
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET38
Fixing typeM14x1.5
Tightening torque140 Nm
Original tyres225/55R19, 215/60R18
Alésage 66.6 : koleso + autostw.com.au ; tirewheelguide indique 57.1 (contradiction, probablement repris de l'ancienne génération). Couple 140 N·m d'après autostw seulement. koleso cite aussi 245/45R20 en OEM sur PHEV sans ET ni largeur (non repris).
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a MG HS (2024)

A MG HS (2024) (from 2024) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/55R19, 215/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
1.5T / HEV / PHEV 5x112 66.6 mm 7Jx19 ET38 225/55R19
1.5T (base, certains marchés) 5x112 66.6 mm 6.5Jx18 ET38 215/60R18

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a MG HS (2024) without rings. Offset, width, diameter and caliper clearance still need checking.

MG S5 EV from 2025 MG eHS from 2020 MG RX6 from 2020 MG RX5 2018–2023 BMW 2 Serie Gran Coupe F74 from 2025 BMW 1 Serie F70 from 2024 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW X3 G45 from 2024 Mercedes AMG GT C192 from 2024 Mini Aceman J05 from 2024 Mini Cooper (J01) from 2024 Mini Cooper F66 from 2024 Mini Countryman U25 from 2024 BMW I5 from 2023 BMW M2 G87 from 2023

Will wheels from another vehicle fit your HS (2024)?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a MG HS (2024)?

A MG HS (2024) (from 2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a MG HS (2024) need a hub centric ring?

The centre bore (hub diameter) of a MG HS (2024) is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a MG HS (2024)?

The recorded original offset is ET38 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a MG HS (2024)?

The specified tightening torque is 140 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a MG HS (2024)?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: MG S5 EV, MG eHS, MG RX6, MG RX5. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.