FRENES

Wheels from MG ZS II on Subaru Impreza GT: compatible?

Yes, the hub is identical

Same 5x100 PCD and same 56.1 mm centre bore: wheels from MG ZS II bolt on and centre on Subaru Impreza GT without rings. You still need to check the offset and tyres, detailed below.

MG ZS II2020–2024Subaru Impreza GT2017–2023
PCD5x1005x100
Centre bore56.1 mm56.1 mm
ThreadM14x1.5M12x1.25
Original wheels 7Jx17 ET41 6.5Jx16 ET48
7Jx17 ET55
7.5Jx18 ET55

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from MG ZS II is compared with the one from Subaru Impreza GT of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx17 ET41 · 215/55R17 — Check on the car

    Compared with the original 7Jx17 ET55 on Subaru Impreza GT: shock absorber side −14 mm, wheel arch side +14 mm, tyre diameter +4.9 % : fit it with the original tyre size of Subaru Impreza GT (205/50R17), not that of MG ZS II. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Subaru Impreza GT (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Subaru Impreza GT on MG ZS II?