FRENES

MG ZS II PCD

2020–2024
VERIFIED
⌀56.1
PCD5x100
Centre bore56.1 mm
Offset (ET)ET41
Fixing typeM14x1.5
Original tyres215/55R17
ZS11 essence 1.0T et 1.5, vis de roue M14 ; le ZS hybride 2024 (génération suivante) est écarté faute de recoupement ; le ZS EV est déjà dans la base
Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a MG ZS II

A MG ZS II (2020–2024) uses a 5x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the MG ZS

Previous generation: MG ZS (2001–2005) — the bolt pattern changes (5x100 instead of 4x100): the wheels are not interchangeable.

ZS 2001–2005 · 4x100 ZS II 2020–2024

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a MG ZS II without rings. Offset, width, diameter and caliper clearance still need checking.

MG ZT 2001–2005 Toyota GR86 from 2021 Subaru Impreza GT 2017–2023 Subaru BRZ from 2012 Toyota GT 86 from 2012 Subaru XV 2011–2017 Saab 9-2X 2004–2006 Subaru Baja 2002–2007 Subaru Impreza WRX STi 2000–2005 Rover 75 1999–2006 Subaru Outback 1998–2003 Subaru Forester 1997–2002 Subaru Impreza 1993–2000 Subaru Legacy 1989–2003

Will wheels from another vehicle fit your ZS II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a MG ZS II?

A MG ZS II (2020–2024) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a MG ZS II need a hub centric ring?

The centre bore (hub diameter) of a MG ZS II is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a MG ZS II?

The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a MG ZS II?

With the same PCD (5x100) and the same centre bore (56.1 mm), these include: MG ZT, Toyota GR86, Subaru Impreza GT, Subaru BRZ. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.