FRENES

Wheels from Mini Countryman on Mercedes E-Classe W213: compatible?

Yes, with hub centric rings

Same 5x112 PCD, but the centre bore of the wheels from Mini Countryman (72.5 mm) is larger than the hub of Mercedes E-Classe W213 (66.6 mm): you need 4 hub centric rings 72.5 → 66.6.

Rings 72.5 → 66.6

Mini Countryman2010–2016Mercedes E-Classe W2132017–2023
PCD5x120 / 5x1125x112
Centre bore72.5 mm66.6 mm
ThreadM14x1.25M14x1.50
Original wheels R
≈6.5Jx16 ET41		 ≈6.5Jx16 ET32

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mini Countryman is compared with the one from Mercedes E-Classe W213 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6.5Jx16 ET41 · 205/65R16 — Check on the car

    Compared with the original ≈6.5Jx16 ET32 on Mercedes E-Classe W213: shock absorber side +9 mm, wheel arch side −9 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mercedes E-Classe W213 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mercedes E-Classe W213 on Mini Countryman?