FRENES

Wheels from Mitsubishi FTO on Mazda Premacy: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Mitsubishi FTO bolt on and centre on Mazda Premacy without rings. You still need to check the offset and tyres, detailed below.

Mitsubishi FTO1994–2002Mazda Premacy1999–2005
PCD5x114.35x114.3
Centre bore67.1 mm67.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈6Jx14 ET46 ≈6Jx14 ET50
≈6Jx15 ET52.5

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mitsubishi FTO is compared with the one from Mazda Premacy of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx14 ET46 · 185/70R14 — Fits like the original

    Compared with the original ≈6Jx14 ET50 on Mazda Premacy: shock absorber side −4 mm, wheel arch side +4 mm, tyre diameter +3.1 % : fit it with the original tyre size of Mazda Premacy (185/65R14), not that of Mitsubishi FTO. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mazda Premacy (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mazda Premacy on Mitsubishi FTO?