FRENES

Wheels from Mazda Premacy on Mitsubishi FTO: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from Mazda Premacy bolt on and centre on Mitsubishi FTO without rings. You still need to check the offset and tyres, detailed below.

Mazda Premacy1999–2005Mitsubishi FTO1994–2002
PCD5x114.35x114.3
Centre bore67.1 mm67.1 mm
ThreadEcrous - 12x1.50Ecrous - 12x1.50
Original wheels ≈6Jx14 ET50
≈6Jx15 ET52.5		 ≈6Jx14 ET46

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Mazda Premacy is compared with the one from Mitsubishi FTO of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx14 ET50 · 185/65R14 — Check on the car

    Compared with the original ≈6Jx14 ET46 on Mitsubishi FTO: shock absorber side +4 mm, wheel arch side −4 mm, tyre diameter −3 % : fit it with the original tyre size of Mitsubishi FTO (185/70R14), not that of Mazda Premacy. Comparison for guidance only (estimated width). Check in detail

  • ≈6Jx15 ET52.5 · 195/65R15

    Mitsubishi FTO has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mitsubishi FTO (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mitsubishi FTO on Mazda Premacy?