Same 4x100 PCD and same 56.1 mm centre bore: wheels from Mitsubishi i-MiEV bolt on and centre on Citroen C-Zero without rings. You still need to check the offset and tyres, detailed below.
| Mitsubishi i-MiEVfrom 2010 | Citroen C-Zerofrom 2010 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 56.1 mm | 56.1 mm |
| Thread | Ecrous - 12x1.50 | M12x1.25 |
| Original wheels | 4Jx15 ET35 | 4Jx15 ET35 |
≈: width estimated from the original tyre size.
Each original wheel from Mitsubishi i-MiEV is compared with the one from Citroen C-Zero of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 4Jx15 ET35 on Citroen C-Zero: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Citroen C-Zero (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Citroen C-Zero on Mitsubishi i-MiEV?