Yes, with hub centric rings
Same 4x100 PCD, but the centre bore of the wheels from Mitsubishi Space Star (67.1 mm) is larger than the hub of Nissan Dayz (56.1 mm): you need 4 hub centric rings 67.1 → 56.1.
Rings 67.1 → 56.1
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Mitsubishi Space Star is compared with the one from Nissan Dayz of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈5Jx14 ET46 · 165/65R14 — Check on the car
Compared with the original 4.5Jx14 ET46 on Nissan Dayz: shock absorber side +6.3 mm, wheel arch side +6.4 mm, tyre diameter +2.3 % : fit it with the original tyre size of Nissan Dayz (155/65R14), not that of Mitsubishi Space Star.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Dayz (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Nissan Dayz on Mitsubishi Space Star?