FRENES

Mitsubishi Space Star PCD

1998–2005
VERIFIED
⌀67.1
PCD4x114.3 or 4x100
Centre bore67.1 or 56.1 mm
Offset (ET)ET46
Fixing typeEcrous - 12x1.50
Tightening torque108 Nm
Original tyres165/65R14
⚠ This model comes with 4x114.3 or 4x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 67.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mitsubishi Space Star

A Mitsubishi Space Star (1998–2005) uses a 4x114.3 or 4x100 PCD and a centre bore of 67.1 or 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 or 4x100 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 67.1 mm — ET46 —
Version 2 4x100 56.1 mm — ET46 165/65R14

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi Space Star without rings. Offset, width, diameter and caliper clearance still need checking.

Mitsubishi Lancer 1.3i, 1.6i 2003–2008 Mitsubishi Carisma 1.6, 1.8GDi,1.9TD 2000–2004 Mitsubishi Carisma 1.8i 1995–2001 Mitsubishi Lancer EVO III 1995–1996 Mitsubishi Lancer EVO II 1994–1995 Mitsubishi Lancer EVO I 1992–1994 Mitsubishi Space Runner 1991–1999 Mitsubishi Space Wagon 1991–1999 Mitsubishi Galant 1989–1992 Mitsubishi Colt 1988–1992 Mitsubishi Lancer 1988–1992 Mitsubishi Sapporo 1985–1990 Mitsubishi Cordia 1982–1990 Mitsubishi Starion 1982–1991 Smart Forfour 2004–2007 Kia Cerato 2003–2008

Will wheels from another vehicle fit your Space Star?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mitsubishi Space Star?

A Mitsubishi Space Star (1998–2005) can have a 4x114.3 or 4x100 PCD depending on the version: check on an original wheel.

Does a Mitsubishi Space Star need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi Space Star is 67.1 or 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi Space Star?

The recorded original offset is ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mitsubishi Space Star?

The specified tightening torque is 108 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mitsubishi Space Star?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Mitsubishi Lancer 1.3i, 1.6i, Mitsubishi Carisma 1.6, 1.8GDi,1.9TD, Mitsubishi Carisma 1.8i, Mitsubishi Lancer EVO III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.