FRENES

Wheels from Nissan Micra K14 on Nissan Note E12: compatible?

Yes, the hub is identical

Same 4x100 PCD and same 60.1 mm centre bore: wheels from Nissan Micra K14 bolt on and centre on Nissan Note E12 without rings. You still need to check the offset and tyres, detailed below.

Nissan Micra K14from 2017Nissan Note E122013–2017
PCD4x1004x100
Centre bore60.1 mm60.1 mm
ThreadM12x1.5M12x1.25
Original wheels 6Jx15 ET50
6Jx16 ET50
6.5Jx17 ET50		 5.5Jx15 ET40
6Jx16 ET45

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Nissan Micra K14 is compared with the one from Nissan Note E12 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET50 · 185/65R15 — Risk of rubbing

    Compared with the original 5.5Jx15 ET40 on Nissan Note E12: shock absorber side +16.4 mm, wheel arch side −3.7 mm, tyre diameter +0 %. Check in detail

  • 6Jx16 ET50 · 195/55R16 — Check on the car

    Compared with the original 6Jx16 ET45 on Nissan Note E12: shock absorber side +5 mm, wheel arch side −5 mm, tyre diameter +0 %. Check in detail

  • 6.5Jx17 ET50 · 205/45R17

    Nissan Note E12 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Note E12 (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan Note E12 on Nissan Micra K14?