FRENES

Nissan Micra K14 PCD

from 2017
VERIFIED
⌀60.1
PCD4x100
Centre bore60.1 mm
Offset (ET)ET50
Fixing typeM12x1.5
Tightening torque113 Nm
Original tyres185/65R15, 195/55R16, 205/45R17
Hub centric rings 60.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Micra K14

A Nissan Micra K14 (from 2017) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 113 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/55R16, 205/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 60.1 mm 6Jx15 ET50 185/65R15
Version 2 4x100 60.1 mm 6Jx16 ET50 195/55R16
Version 3 4x100 60.1 mm 6.5Jx17 ET50 205/45R17

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Micra K14 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Almera from 2015 Nissan Note 2006–2013 Nissan Kubistar 2003–2009 Nissan Micra K12 2003–2010 Nissan Cube 2002–2008 Nissan Platina 2002–2010 Renault Twingo E-Tech from 2026 Dacia Jogger from 2022 Dacia Spring from 2021 Dacia Sandero III from 2020 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Smart Forfour Back 2014–2021 Smart Forfour Front 2014–2021 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023

Will wheels from another vehicle fit your Micra K14?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Micra K14?

A Nissan Micra K14 (from 2017) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Nissan Micra K14 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Micra K14 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Micra K14?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Micra K14?

The specified tightening torque is 113 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Micra K14?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Nissan Almera, Nissan Note, Nissan Kubistar, Nissan Micra K12. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.