Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Murano bolt on and centre on Renault Rafale without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Murano is compared with the one from Renault Rafale of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈8Jx20 ET50 · 255/55R20 — Check on the car
Compared with the original ≈7.5Jx20 ET37 on Renault Rafale: shock absorber side +19.4 mm, wheel arch side −6.7 mm, tyre diameter +9.6 % : fit it with the original tyre size of Renault Rafale (235/45R20), not that of Nissan Murano.
Comparison for guidance only (estimated width). Check in detail
- ?
7.5Jx18 ET50 · 235/65R18
Renault Rafale has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Rafale (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Rafale on Nissan Murano?