Yes, the hub is identical
Same 6x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Pathfinder bolt on and centre on Renault Alaskan without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Pathfinder is compared with the one from Renault Alaskan of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7.5Jx16 ET30 · 245/70R16 — Check on the car
Compared with the original 7Jx16 ET45 on Renault Alaskan: shock absorber side −8.6 mm, wheel arch side +21.4 mm, tyre diameter −1.8 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Alaskan (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Alaskan on Nissan Pathfinder?