Wheels from Renault Alaskan on Nissan Pathfinder: compatible?

Yes, the hub is identical

Same 6x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Alaskan bolt on and centre on Nissan Pathfinder without rings. You still need to check the offset and tyres, detailed below.

Renault Alaskanfrom 2016Nissan Pathfinder1986–2004
PCD6x114.36x139.7 / 6x114.3
Centre bore66.1 mm66.1 mm
ThreadEcrous - 12x1.25-
Original wheels 7Jx16 ET45 R
≈7.5Jx16 ET30

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Alaskan is compared with the one from Nissan Pathfinder of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx16 ET45 · 255/70R16 — Check on the car

    Compared with the original ≈7.5Jx16 ET30 on Nissan Pathfinder: shock absorber side +8.6 mm, wheel arch side −21.4 mm, tyre diameter +1.9 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Pathfinder (-), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan Pathfinder on Renault Alaskan?