Yes, the hub is identical
Same 4x100 PCD and same 54.1 mm centre bore: wheels from Nissan Pixo bolt on and centre on Peugeot 108 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Pixo is compared with the one from Peugeot 108 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
4.5Jx14 ET45 · 155/65R14 — Check on the car
Compared with the original 4.5Jx14 ET35 on Peugeot 108: shock absorber side +10 mm, wheel arch side −10 mm, tyre diameter −2.3 % : fit it with the original tyre size of Peugeot 108 (165/65R14), not that of Nissan Pixo.
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 108 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Peugeot 108 on Nissan Pixo?